Before installing the polyurethane solid forklift tire, in order to ensure its normal operation and extend its service life, you need to pay attention to the following key aspects:
1. Preparation
Check the tire and wheel: First, confirm whether the size of the tire and the model of the wheel match, which is the basis for installation. At the same time, check whether the tire and the wheel are damaged or severely worn. If necessary, they should be repaired or replaced.
Clean the work site: Make sure the work site is clean and flat for tire installation. This not only improves work efficiency, but also avoids installation problems caused by debris.
2. Tire preparation
Wash the tire: Before installation, the tire should be carefully cleaned to remove dirt and grease on the surface to ensure the cleanliness of the tire. This helps to ensure a tight fit between the tire and the wheel.
Check the tire tread: Check whether the tire tread is flat and whether there are any damages such as cracks or pits. These damages may affect the performance and service life of the tire.
3. Installation precautions
Apply grease: Apply low-temperature grease to the bearing to reduce friction and resistance during installation and ensure smooth installation.
Correct installation: Tighten the nuts at both ends of the guide wheel with appropriate torque and tighten the screw plugs. At the same time, ensure that the position and angle between the tire and the wheel hub are correct to avoid deflection or distortion.
Insulation and cleanliness: During the entire installation process, attention should be paid to the insulation and cleanliness of the guide wheel sleeve, and there should be no jamming and periodic looseness. This helps to ensure the normal operation of the tire and extend its service life.
4. Safety awareness
During the installation process, operators need to undergo professional training and master the correct installation techniques and precautions. At the same time, maintain safety awareness to avoid accidents caused by improper operation.
In summary, Polyurethane solid forklift tires need to pay attention to preparation work, tire preparation, installation precautions and safety awareness before installation. By following these precautions, you can ensure the correct installation and normal operation of the tire and extend its service life.
